Home > Concrete Coatings/Repair
Choose a sub category:
Epoxies Urethanes Repair
Sort By:
Page of 2
Roller End Caps Roller End Caps

Plastic 1-1/2" end caps for use with standard core roller cover

Our low Price: $0.88
NC-Fast Set Joint Filler NC-Fast Set Joint Filler

100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors Developed to fill and protect joints in trafficked industrial and retail concrete floors. Its primary function is to support such traffic and protect joint edges. It is intended for use where final temperatures are from 32˚F (0˚C) to +120˚F (49˚C). *Mixing tubes sold separately.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Black MM-RS 88 600ML Joint Filler Black

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Bronze MM-RS 88 600ML Joint Filler Bronze

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Mocha Brown MM-RS 88 600ML Joint Filler Mocha Brown

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Warm Stone MM-RS 88 600ML Joint Filler Warm Stone

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Clear/Natural MM-RS 88 600ML Joint Filler Clear/Natural

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Intellectual Gray MM-RS 88 600ML Joint Filler Intellectual Gray

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Brownstone MM-RS 88 600ML Joint Filler Brownstone

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Oiled Teak MM-RS 88 600ML Joint Filler Oiled Teak

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Burnt Sienna MM-RS 88 600ML Joint Filler Burnt Sienna

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler Standard Gray MM-RS 88 600ML Joint Filler Standard Gray

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-RS 88 600ML Joint Filler White MM-RS 88 600ML Joint Filler White

RS 88 is a 100% solids, two component heavy duty,
semi-rigid polyurea joint filler intended for use in filling and protecting
contraction and construction joints in industrial, retail or commercial concrete floors.

Our low Price: $42.00
MM-Rapid ReFloor MM-Rapid ReFloor

Our low Price: $45.99
Moisture Cure Urethane 1 Gallon Moisture Cure Urethane 1 Gallon

NC- Moisture Cure Urethane (NC-MCU) is a one component moisture cured polyurethane floor coating that exhibits superior abrasion resistance, chemical resistance and flexibility. This product is UV stable. This product does not meet Federal VOC standards.

Our low Price: $48.65
https://www.pearlabrasive.com/all/product/877342 5 x 7/8, 5/8 P3™ Random Tungsten Carbide Blade

P3™ Random Tungsten Carbide Blade for removal of hard to semi-hard joint sealant from concrete and masonry expansion joints!

  • Tungsten carbide welded permanently on blade’s steel core.
  • Cuts through material which conventional diamond or abrasive wheels can't!
  • Cuts through joint sealant - without melting the sealant or loading.
  • Carbide blade that cuts felt and paper type expansion joints, hard caulk, rubber, plastic and drywall.
  • To re-sharpen a blade, reverse the rotation direction of the blade.
  • Max RPM: 12,250. Dry cutting.

Our low Price: $54.40
M-Flush Gallon M-Flush Gallon

M-Flush is a voc-free single component polymer intended for use in cleaning and maintaining dual component pumps used for the installation of joint fillers. M-Flush can be used for flushing polyurethanes, polyureas and epoxies from pump equipment and parts.

Our low Price: $60.71
Black Diamond Hard Surface Shield Black Diamond Hard Surface Shield

*NC-BDSS is a one component, high performance floor polish
* May be burnished at high speeds for extreme high gloss
*Can be used over many coatings and surfaces to provide a protective layer with excellent scratch and mark resistance
* Available in 1 and 5 gallon sizes

Our low Price: $64.00
Water Based Epoxy Part B Water Based Epoxy Part B

NC- Water Based Epoxy Coating (NC-WBE) is a two component high strength, moisture tolerant, water based epoxy coating.  NC-WBE has excellent chemical resistance, abrasion resistance, and substrate penetration.  This product is a stand alone coating when installed in multiple coats.  NC-WBE is suitable as a topcoat

Our low Price: $64.93
Oil Tolerant Epoxy Coating 2 Gallon (Black Only) Oil Tolerant Epoxy Coating 2 Gallon (Black Only)

NC- Oil Tolerant Epoxy Coating (NC-OTEC) is a two component solvent based epoxy coating that exhibits excellent characteristics for coating over petroleum based oil contaminated concrete. This product allows superior substrate penetration which results in excellent adhesion and is an ideal primer for the oil contaminated concrete substrate.

Our low Price: $88.00
First Step 5 Gal. First Step 5 Gal.

FIRST STEP is a pre-grind, surface prep, Concrete and Brick cleaning and
etching compound that is biodegradable and a non-hazardous material.
FIRST STEP allows you to start at a higher grit level in the diamond
grinding and polishing process while significantly lowering your labor
and diamond costs.  FIRST STEP can also be used to prepare floors before
acid staining and dying of concrete.  Additional benefits include:
FIRST STEP Degreases and emulsifies oil, grease and other dirt in one
application.

Our low Price: $95.00
Water Based Epoxy (Clear) Water Based Epoxy (Clear)

NC- Water Based Epoxy Coating (NC-WBE) is a two component high strength, moisture tolerant, water based epoxy coating.  NC-WBE has excellent chemical resistance, abrasion resistance, and substrate penetration.  This product is a stand alone coating when installed in multiple coats.  NC-WBE is suitable as a topcoat.

Our low Price: $130.74
Epo-gel  2 Gallon Epo-gel 2 Gallon

NC-Epo-Gel (NC-EG) is a two component fast set epoxy gel designed for repair on horizontal surfaces. This product is easy to mix and use and has the consistency of petroleum jelly.

Our low Price: $135.13
Crack Filler Crack Filler

NC-Epoxy Crack Filler (NC-ECF) is a two component 100% solids epoxy
crack filler designed for shallow repair on either vertical or
horizontal surfaces. This product is easy to mix and use and has a
non-critical mix ratio.

Our low Price: $138.50
High Build Epoxy 3 Gal Kit LV Clear, Satin and Colors High Build Epoxy 3 Gal Kit LV Clear, Satin and Colors

NC-High Build Epoxy  (NC-HBE-LV) is a two component  93% (+/- 1%) solids  epoxy colored coating designed for applications where a high solids epoxy is needed before applying an additional coat or a 100% solids topcoats for build coats over concrete. This product can be used as a stand alone coating.

Our low Price: $168.43
Crystal Clear Epoxy Binder LV 93%  3 Gal Kit Crystal Clear Epoxy Binder LV 93% 3 Gal Kit

NC- Crystal Clear Epoxy Binder LV(NC-CCEBLV) is a two component 93% solids high performance epoxy coating that can be used either as a clear top coat or filled with paint chips, marble chips, or quartz aggregate mixtures.

Our low Price: $195.53
High Performance Urethane Clear 3 gal. kit High Performance Urethane Clear 3 gal. kit

NC- High Performance Urethane (NC-HPU) is a two component high performance aliphatic polyurethane floor coating.  This coating is extremely abrasive and chemical resistant, with superior flexibility and is UV stabile

Our low Price: $197.99