Home > Buffers/Scrubbers/Cleaners > Grinders & Polishers
Sort By:
Page of 2
3" Velcro Hook 3" Velcro Hook

Adhesive backed replacement

Our low Price: $3.00
3" Flexible Rubber Backer Pads 3" Flexible Rubber Backer Pads

*Allows for more flexibility to contour to the most difficult surfaces.
* 5/8”-11

Our low Price: $10.00
AC-21" Impress Cure Pad AC-21" Impress Cure Pad

Our low Price: $10.43
4" Flexible Rubber Backer Pads 4" Flexible Rubber Backer Pads

*Allows for more flexibility to contour to the most difficult surfaces.
* 5/8”-11

Our low Price: $13.00
20" Sanding Screens 20" Sanding Screens

Our low Price: $13.85
5" Flexible Rubber Backer Pads 5" Flexible Rubber Backer Pads

*Allows for more flexibility to contour to the most difficult surfaces.
* 5/8”-11

Our low Price: $14.00
Concrete Destroyer 32 OZ Concrete Destroyer 32 OZ

Concrete Destoyer is an alternative to acids and phosphates. It attacks the portland in cement by completely disolving the hardened cement to a mushy substance that is completely rinseable with high pressure and cold water.

Our low Price: $14.00
4" Rigid Aluminum Backer Pad 4" Rigid Aluminum Backer Pad

*Sturdy aluminum construction for great durability
*5/8”-11

Our low Price: $15.56
21" HEAT Pads 21" HEAT Pads

Our low Price: $30.38
27" Heat Pads 27" Heat Pads

Our low Price: $55.22
17" Driver Pad 17" Driver Pad

Our low Price: $58.70
20" Viper Pad Driver 20" Viper Pad Driver

Our low Price: $75.60
Universal 7" Dust Shroud Universal 7" Dust Shroud

*Soft brushes prevent dust from escaping and help move the tool over the surface
*
Ideal for concrete finishing, concrete material removal and paint or surface coating removal

Our low Price: $108.33
Slurry Solidifier Slurry Solidifier 50 Lbs

Slurry Solidifier is a proprietary blend with special additives that
separates suspended solids from processed slurry water within minutes.
This powerful material will safely and easily reduce the amount of
slurry waste by removing the usable water. It only takes 2 to 4
tablespoons of Slurry Solidifier per gallon of slurry. The water can be
treated for PH balance and disposed of or recycled back into the job
site machinery. It’s easy to use and requires no special machinery to do
the job.

Our low Price: $149.95
Male Plugs for Grinder  250 Volt Male Plugs for Grinder 250 Volt

IEC 60309 (6H) 60 AMPERE-250 VOLT (UL/CSA), 63 AMPERE- 230 VOLT (VDE) WATERTIGHT (IP67) "UNIVERSAL APPROVED" POWER PLUG, 2 POLE-3 WIRE GROUNDING (2P+E), CLAMP & COMPRESSION STRAIN RELEIFS, NYLON BODY (POLYAMIDE 6). BLUE.

Our low Price: $174.02
Female Plugs for Grinder  250 Volt Female Plugs for Grinder 250 Volt

IEC 60309 (6H) 60 AMPERE-250 VOLT (UL/CSA), 63 AMPERE- 230 VOLT (VDE) WATERTIGHT (IP67) "UNIVERSAL APPROVED" IN-LINE CONNECTOR, 2 POLE-3 WIRE GROUNDING (2P+E), CLAMP & COMPRESSION STRAIN RELIEFS, NYLON BODY (POLYAMIDE 6). BLUE.

Our low Price: $229.80
Hitachi -7" Disc Sander/Polisher Hitachi -7" Disc Sander/Polisher

The SP18VA(H) 11.0 AMP Variable Speed Disc Sander/Polisher is capable of sanding metallic surfaces, preparatory sanding of metallic and wooden surfaces prior to painting, removal of paint and rust, finishing woodwork, making flush joints of wooden plates, finishing and polishing metallic surfaces such as motor vehicles, refrigerators, elevators, etc., polishing lacquered surfaces on wooden products, and polishing synthetic resin and ebonite products.

Specifications

Amps

11

Wheel Diameter

7"

No-Load Speed

0-600/3,400 RPM

Spindle Thread

5/8-11"

Spindle Lock

Yes

Electronic Speed Control

Yes

Length

10-19/32"

Weight

6.2 lbs

Our low Price: $235.34
Metabo-7" Variable Speed Grinder PE 15-30 Metabo-7" Variable Speed Grinder PE 15-30

  • Polisher with ideal speed range for grinding and polishing of stone surfaces
  • Maximum productivity thanks to powerful 1,500 Watt motor and high-performance planetary gear train
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics with Thumbwheel:
    for working at customised speeds to suit the application material and
    speeds that remain almost constant, even under load
  • Tool-free adjustable bow-type handle for safe and uniform guidance when working
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Auto-stop carbon brushes to protect the motor

Our low Price: $318.33
https://store.nikkacorp.com/product-p/1458 Pacific-Mini Edger

There are not many tools more flexible than the Pacific Floorcare® FM-ME floor machine and edger unit - plus, it delivers industrial performance. The mini-edger truly transfers many of your manual detail tools.

Our low Price: $540.00
http://www.hitachipowertools.com/us/main-navigation/tools?category=/tools/concrete---masonry/masonry-saws&title=RP350YDH+9.2+Gallon+Commercial+HEPA+Vacuum Hitachi 9.2 Gallon Commercial HEPA Vacuum

9.2 Gallon Commercial HEPA Vacuum is used for the collection of dust generated when concrete and wood are ground, cut or drilled, for general cleaning, and for the collection of water spilled on the floor. It comes with two HEPA filters to capture more harmful dust particles, and helps with compliance for the recently instated OSHA 1926.1153 Crystalline Silica Dust Regulation. The RP350YDH can be used with Hitachi Dust Collection Attachments as well as other universal attachments in the market.

Includes:

  • (2) HEPA Filters (Installed)
  • 10' Hose
  • (1) Poly Bag with Closures
  • Sealing Plug for Tank
  • Step Down Reducer
  • Onboard Accessory Caddy (installed)


Specifications
Tank Material Capacity Dry 5.6 Gal
Tank Material Capacity Wet 4.9 Gal
Voltage 120V
Suction 130 CFM
Tool Actuated Outlet Yes
Automatic Filter Cleaning Yes
HEPA Filters 2 Included
Tool Weight 34.6 lbs

Our low Price: $739.97
https://www.pearlabrasive.com/15-hexpin-hexplates-for-17-or-18-buffers/product/0/1286 15" Hexpin® Hexplates™ for 17" or 18" Buffers

IT DOES MORE THAN SCRAPE!

The Pearl Hexpin® System has revolutionized floor preparation. Use the standard Hexpin® Plates or Hexpin® Blocks with our patented system of interchangeable Hexpins® for grinding, sanding, polishing and coating removal. Pearl’s unique spring-based technology allows the Hexpin® attachments to float easily over rough surfaces while the fluted plate design helps maintain dust control. Engineered for use on standard floor buffers and dual-headed diamond grinders, the Pearl Hexpin® System is a tool that gives you choices. When looking to increase productivity and profitability, look to Pearl Professional Products for true craftsmanship... THE PEARL HEXPIN® SYSTEM.

Wide variety of interchangeable pins for grinding, sanding and coating removal. Spring mounted pins to allow for uneven surfaces.

Our low Price: $1,064.30
Black Diamond 3 Head Countertop Polisher Black Diamond 3 Head Countertop Polisher

*Designed to produce a flat swirl free finish
*Wet or dry use available
*Variable speed

Our low Price: $1,379.31
Viper Dragon 2000DC 20" High Speed Buffer Viper Dragon 2000DC 20" High Speed Buffer

If built-in dust control is a priority because you're polishing large areas and don't have time to dust mop after burnishing, the Viper Dragon series 2000DC is a smart choice for the money. The passive dust control system in this machine is designed to pick-up light dust, fractured floor finish and floor pad fibers while a floor hugging nylon bristle skirt stops any air or debris from escaping around the head assembly.

The large, non-marking transport wheels help get the machine from storage to job site without difficulty. Storage is also a piece of cake with the fold up handle, with the release being right on the handle. It conveniently folds away for your tighter storage spots, either in a vertical or horizontal position.

Our low Price: $1,563.36