NC-Polyaspartic P900 2.5 gal Clear and Colors

Pigment Colors Sold Separately

• Rapid curing (from 5 to 120 minutes, depending on the formulation
• Can be successfully applied at surface temperatures from -30°F to 140°F
• Very low viscosity-equivalent to water-which gives it outstanding wetting ability on a properly prepared concrete floor
• High film build (up to 18 mils in a single coat)
• Bubble-free surfaces even at high humidity (although high humidity can speed up the cure time considerably)
• Potlife of 5 to 120 minutes
• (as high as 100%), which means low or no volatile organics (VOCs) during application
• UV stable so it will never turn yellow-and can provide UV protection to underlying coatings
• Made with a high solids content
• The cured coating can handle temperatures up to 350°F
• Crystal clear and does not blush white from moisture in the concrete
• Able to resist most stains, especially from oils and fats and even from red wine
• High abrasion resistance-higher than epoxy or urethane